|
24
Hour Service Assistance
Rebuilding
& Repair Services
PIV
Replacement Drives
PIV
Drive Parts
Drive
Identification
|
|
Identifying
Your PIV Drive or Gear Reducer
|
|
|
|
TYPICAL
PIV WERNER REIMERS (GERMAN DRIVE)
IDENTIFICATION PLATE
|
This is a typical identification
plate plate found on P.I.V. Werner Reimers, Posirex, Stufenlos, and
Posired variable speed drives, gearboxes and reducers. Most of this
information is also found on another smaller identification plate
affixed to a control lever inside the drive.
When ordering parts, replacement
drives or resolving technical issues about the drive, we need to know
the following information from the ID plate:
- DRIVE TYPE: This is
the type of drive. RZ0, AB0, A12 and U0 are examples of drive
types, although, there are many, many, other types of drive
designations.
- SERIAL NUMBER: On Werner
Reimers drives, the serial number usually the form of 123456
G1, where 123456 is the first part of the
serial number and G1 is the second part of the
serial number (some older Werner Reimers drives do not have
a G suffix). Other examples are 355 640 G6, 412 045 G12,
512 233, G1, etc.
- CHAIN (KETTE) TYPE:
This indicates the type of chain found inside the drive. The
chain type usually begins with a letter and is followed by a
series of numbers and letters. Such as, Rb140, A233V, RB034,
A335VQ, RC370, WK2484S. There are many other types of PIV chains
available.
There are other fields on the ID
plate which we normally do not use when ordering spare parts and replacement
drives. We have included these definitions here for your information.
N1 is the input RPM, N2 is the output RPM. P2 is the output power
in kilowatts and M2 is the output torque in Newton-meters.
WE ALSO REPAIR
DRIVES FROM OTHER MANUFACTURERS.
|
